ikXS provides stable, freeze-free HD service.
For Dish or bev, they are true private server providers, with only 50 people per share.
Re: Sonicview 8000 HD doesnt resets
Originally Posted by rodrigocv
Please HELP my SONICVIEW 8000 HD its locked in POWER ON on the display its first says BOOTING then POWER ON but doesnt go to any channel its LOCKED in POWER ON
what do i have to do?
Try replacing the C 10 and C 24 Capacitors on your Power Supply Board.
The Caps are C10 and C24
Both Caps are 1000Uf 10 Volt
Replace with 1000Uf 16 Volt —–Or any 1000Uf Cap with a higher Voltage rating that will fit.
The pic shows them replaced with 35 Volt units.
When replacing make sure you have polarity correct.
Polarity is marked on the circuit Board
The white stripe on the side of the unit is the Neg Polarity, also neg lead is always shorter lead.
Sounds like you are still running the factory file, with a factory file you will be missing some options and entering keys will not make any difference.
To fix your problem you will need to load the fix file, you can download it from here: http://www.ftaprofessionals.tv/sonic…08-2009-a.html
Flashing a Sonicview 8000 with a USB Stick
STEP 1 – Insert your USB Stick into your PC
STEP 2 – Format the virgin USB stick as FAT32
STEP 3 – Then download the latest SV8000 bin/rom
STEP 4 – Unzip the file and you should be left with a bin HD8000_vXXXX.rom (example HD8000_v0099.rom)
STEP 5 – Drag and drop the HD8000_vXXXX.rom into the USB Stick
STEP 6 – Take the USB stick and insert it into the SV8000
STEP 7 – Boot the SV8000
STEP 8 – Go to USB Storage in the Menu, it should list out all files in the thumb drive for you (there should old be 1)
STEP 9 – Then choose HD8000_vXXXX.rom and wait for it to complete and reboot itself.
STEP 10 – DONE!
Ps. Because this is a brand new receiver I would recommend to try to exchange it for the NFusion Nuvenio HD as that way you will be able to use IKS if you need to once N3 is here. Nagravision 3 News – FTA Keys FTA Files and FTA Instructions for FTA Receivers